High-speed High-resolution Spinning-disk Confocal Microscope for live cell and fixed samples VoittajaKuvaus ja alkuperäinen tekstiHankinnan kuvaus We asked tenders for an advanced spinning-disk confocal microscopy system (High-speed High-resolution Spinning-disk Confocal Microscope for live cell and fixed samples). Instrumentation will be acquired to the Biomedicum Imaging Unit, imaging core facility within the University of Helsinki. Maximum price of system is 450 000 € (VAT 0 %), including shipping, installation, user training, and insurance until final acceptance of instrument. System must be delivered and installed within 14 weeks from purchase order date. In addition, we ask annual preventative maintenance contract for total 5 years after warranty period as an option. Price per year after warranty period shall be indicated and total price over five years given (for the evaluation). The buyer reserves the right to decide at the end of each yearly period whether to accept the option of continuing the service contract for another year (up to maximum five years) at tendered price. | University of Helsinki | 5.10.2026 | – |
Instrumentit kertakäyttöiset (KK), leikkausveitset ja -terät, ihostanssit VoittajaKuvaus ja alkuperäinen tekstiHankinnan kuvaus Pohjois-Pohjanmaan hyvinvointialue (POHDE) pyytää omasta ja siihen kuuluvan yhteistyöalueen yksiköiden puolesta tarjoustanne Kertakäyttöisistä (KK) instrumenteista, leikkausveitsistä, -teristä ja ihostansseista tämän tarjouspyynnön ja sen liitteiden mukaisesti. Yhteistyöalueeseen kuuluvat Pohteen lisäksi Lapin, Kainuun ja Keski-pohjanmaan hyvinvointialueet. Kilpailutus on jaettu kolmeen osa-alueeseen: 1. ATULAT JA SAKSET KERTAKÄYTTÖISET (KK) 2. MUUT KIRURGISET INSTRUMENTIT KERTAKÄYTTÖISET (KK) 3. VEITSET, IHOSTANSSIT JA KYREETIT KERTAKÄYTTÖISET (KK) Hankintakausi on kaksi (2) vuotta + yksi (1) + yksi (1) optiovuodet alkaen arviolta 1.5.2025. | Pohjois-Pohjanmaan hyvinvointialue | 2.10.2025 | – |
Vaakojen kalibrointipalvelut VoittajaKuvaus ja alkuperäinen tekstiHankinnan kuvaus Hankinnan kohteena ovat VTT:n eri tutkimusympäristöissä käytettävien vaakojen kalibrointipalvelut. Tarjouskilpailun tavoitteena on löytää ammattimaisia sopimuskumppaneita vaakojen kalibrointipalvelutoimittajiksi. Sopimus tehdään puitejärjestelynä enintään kolmen (3) tarjoajan kanssa siten, että VTT voi varmistaa palveluiden saatavuuden mahdollisimman kattavasti. Kilpailutuksella etsitään vaakojen kalibrointipalveluiden toimittajia kahden (2) vuoden puitesopimuskaudelle. Varsinaisen sopimuskauden jälkeen VTT:llä on optio jatkaa sopimusten voimassaoloa kahdella vuodella, vuosi kerrallaan (1 + 1). VTT:n nykyiset vaakojen kalibrointisopimukset päättyvät elokuussa 2025. Tavoitteena on, että uudet sopimukset valittujen toimittajien kanssa astuvat voimaan syyskuussa 2025. Hankinnan kohde on kuvattu tarkemmin tarjouspyyntöasiakirjoissa. | TEKNOLOGIAN TUTKIMUSKESKUS VTT OY | 3.9.2025 | – |
Olympus Evident VS200 Slide skanneri VoittajaKuvaus ja alkuperäinen tekstiHankinnan kuvaus Olympus Evident VS200 hankitaan FIMM:n digitaalisen mikroskopian ja molekyylipatologian yksikköön Helsingin yliopistolle. | Helsingin yliopisto | 8.8.2025 | – |
Skanneri näytelasien digitointiin, Pohjois-Savon hyvinvointialue VoittajaKuvaus ja alkuperäinen tekstiHankinnan kuvaus Hankinnan kohteena on Skanneri näytelasien digitointiin Itä-Suomen biopankkiin. Hankinnan sisäinen tunniste (20220107). Skannerilla skannataan sekä standardikokoisia- että makrolaseja. | Sansia Oy, Pohjois-Savon hyvinvointialue | 31.3.2025 | – |
Microscope slide scanner for brightfield, fluorescence and polarization VoittajaKuvaus ja alkuperäinen tekstiHankinnan kuvaus The brightfield, fluorescence and polarization microscope slide scanner will be part of the Biocenter Oulu Transgenic and Tissue Phenotyping core facility at the University of Oulu and is to be installed in the laboratory at the Biocenter Oulu premises at the Kontinkangas campus. Biocenter Oulu core facilities have an open access user policy, and the instrument will be operated by individual customers as self-service. Therefore, instrumentation and software should be easy to use and meet the requirements of users from different research areas. The instrument will be used primarily for life science imaging. The microscope slide scanner provides a functional system for scanning contrasted samples on microscope slides and viewing the acquired images. The scanner is specifically designed for research and not for clinical purposes. The instrument holds brightfield, phase contrast or comparable contrast enhancing technique, dark field, HiLo laser speckle-based structured illumination optical sectioning for fluorescence, and polarization modes for digitalizing whole microscope slides and has an option for capturing Z-stacks. A minimum of six fluorescence channels allows multiplexing, and separate high resolution RGB color and monochrome cameras for brightfield and fluorescence imaging, respectively. A relatively large range optical zooming capability is achieved with air objectives without the requirement of immersion objectives. Slides are loaded in the scanner within multi-slide trays that can be filled manually. Multiple trays can be imaged in a single run. There are trays for different sized microscope slides available. There are no specific requirements for slide specifications, like trademark, but any microscope slide with a correct size, shape and thickness is compatible. The user interface is self-explanatory and easy to use. The scanner generates a low-resolution preview, automatically detects the samples, and sets a focus map. It is possible to freely navigate in a live mode to any location on the slide. Automated settings/functions can also be adjusted manually. Individualized settings can be saved to generate scanning profiles for later use. The set-up is upgradeable with additional accessories and software components. A free offline software capable of opening and modifying the images after acquisition is downloadable on the end-users’ workstations. The image format is directly, without a need for any conversion, compatible with the Visiopharm image analysis software. The procurement is co-funded by the Research Council of Finland, FIRI 2023: roadmap research infrastructures 2021–2024 and international memberships. | Oulun yliopisto | 27.3.2025 | – |
DMA-laite VoittajaKuvaus ja alkuperäinen tekstiHankinnan kuvaus Hankinnan kohteena on Dynaaminen mekaaninen analyysilaite, DMA-laite, laitteistokokonaisuus siten, että toimitus sisältää ohjaustietokoneen ohjelmistoineen ja nestetypensyöttöjärjestelmän. Laitetta käytetään materiaalien dynaamisten mekaanisten ominaisuuksien tutkimiseen kontrolloidun lämpötilaohjelman alaisena. Laitteisto tulee olla tilaajan osoittamaan paikkaan käyttövalmiiksi asennettu ja käyttötestattu. Toimituskokonaisuuteen sisältyy laitteiston käyttöön annettava koulutus vuoden 2025 aikana. | Puolustusvoimien logistiikkalaitos | 28.2.2025 | – |
Confocal microscopes and TIRF microscope VoittajaKuvaus ja alkuperäinen tekstiHankinnan kuvaus Tampere University Foundation sr is inviting tenders for - 2 high-end confocal microscopes, - and 1 TIRF microscope. This call consists of 3 parts. Tenderer can submit quotations for all of them, or just for one of them. In tenders comparison phase contracting authority considers it an advantage if tenderer can be considered a supplier candidate for more than just one part of the call. | Tampere University Foundation sr | 15.7.2024 | – |
Confocal microscope VoittajaKuvaus ja alkuperäinen tekstiHankinnan kuvaus Confocal microscope will be acquired for the Institute of Biotechnology, University of Helsinki. | University of Helsinki | 19.6.2024 | – |
Laboratoriolaitteiden hankinta 2023-2025 Luonnonvarakeskukselle VoittajaKuvaus ja alkuperäinen tekstiHankinnan kuvaus Luonnonvarakeskus (Luke) kilpailuttaa ja hankkii laboratoriolaitteita ja - välineitä tässä tarjouspyynnössä ja sen liitteissä 1-6 asetettujen ehtojen mukaisesti. Hankinta on jaettu osa-alueisiin seuraavasti: 1. Pipetit 2. Pienlaitteet (mikrobiologia) 3. Vaa'at 4. Myllyt 5. Vesilaitteet 6. Kylmälaitteet 7. Lämpölaitteet 8. Kemikaali- ja laminaarikaapit Osa-alueissa 1-8 valitaan jokaiseen osa-alueeseen kolme (3) toimittajaa, joilta tilataan etusijajärjestyksessä. Hankintasopimuksen kesto on 2 vuotta, ja sopimusta voidaan jatkaa kahdella yhden (1+1) vuoden optiolla. Hankintayksiköllä ei ole määräostovelvoitetta. | Luonnonvarakeskus | 18.12.2023 | – |
Inverted Microscope VoittajaKuvaus ja alkuperäinen tekstiHankinnan kuvaus University of Oulu, Elbuken Lab: Microfluidics and Biosensor Research Group, purchased an inverted microscope. Purpose of the investment is to monitor particle flow inside microfluidic devices that are custom-designed using microfabrication techniques. The microscope will be used to measure device dimensions, image flow profiles using fluorescent particle tracers and to record images and time lapse images. The microscope will complement the existing microscopes and will be used for long-term imaging of particle flow inside microchannels. The microscope will be used for research purposes for microfluidic system and biosensor development, e.g. . microfluidic connections are made from above for the microfluidic devices we produce. These devices are primarily made put of polymers (PDMS and PMMA) and bonded on 1mm-thick glass or PMMA. Hence, at least 5 cm working space is needed above the devices, thus an inverted microscope is needed. Both mm-scale channel features and micron-scale particle flow will be monitored, hence a range of magnification options are required to cover at least range from 2,5x to 65x. Imaging will be done using multiple cameras, including the existing high speed camera, hence multiple camera port options and simultaneous imaging from two cameras is required, one being the existing high speed camera. A color camera is needed for imaging. A high sensitivity monochromatic camera is required for fluorescent imaging. Multiple types of particles will be imaged, hence brightfield, fluorescent, polarization and DIC contrast options are needed. Phase contrast is not needed. Automated turret change is not needed. R,G,B and UV ranges should be covered for fluorescent imaging with proper light source and filter set combinations. A desktop computer with screen is available, hence the software should be installed to the existing desktop. Software is required to control the motorized capability, x-y and z direction movement. The microscope needs to be available for further upgrades, such as higher automation, confocal imaging, Raman imaging, hence an upgradable chassis is required. Expected value of the acquisition is 75.000-130.000 € (VAT 0 %). Later on, the value may be more than 215.000 € (VAT 0 %) including options and other unspecified additional costs of additional features in the future when upgrading of the microscope is needed. The future upgrades (options) do not affect the tender price comparison. Financed by European Union funds: European Research Council Executive Agency (ERCEA). EU ERC Consolidator, project name: BiNet - Particle distribution dynamics in nonlinear bifurcating networks. HORIZON ERC Grants. | University of Oulu | 28.11.2023 | – |